AccuMate V
1,8 Amp POWER charger & maintainer - the most powerful charger in its class.
Use for all 12V lead-acid batteries 7Ah to 100Ah
AccuMate V is a versatile, 4-stage, automatic charger and maintainer specially designed for all modern & classic, sealed & filler cap, larger 12V lead-acid batteries.
Ideal for use on batteries for cruiser & touring motorcycles, cars & boats.
AccuMate V will charge and maintain any size battery, although best suited to batteries of capacity from 7Ah to about 90Ah. For fast charging of larger batteries, one of our AccuMate PRO models would be better suited.
ACCESSORIES
The constant current charge, followed by constant voltage absorption and float charging steps, is ideal for all types of rechargeable lead-acid batteries • filler cap types • all types of AGM "MF" for motorcycles • ATVs & watercraft valve regulated (VRLA) & GEL-electrolyte types.
Ideal for long term maintenance of the batteries of irregularly or seasonally used vehicles such as cruiser & touring motorcycles & sportscars, vintage & collectors` vehicles, gliders, small aircraft & boats, & battery-powered industrial appliances.
Very easy to use - Connect to the battery and mains power. The rest is fully automatic.
Comprehensive & intelligent LED indications • AC power on • wrong polarity connection • charging • storage / maintaining (charge completed).
No risk of overcharging - AccuMate `s special monitoring circuits vary & regulate the current & voltage exactly according to the battery manufacturer’s specifications.
SAFE & foolproof - No worries about wrong connections or accidentally shorting the battery clamps. AccuMate’s circuit board is automatically protected without fuses. And spark generation is suppressed.
Compact, yet powerful - Safely charges batteries from as low as 2V which most other chargers give up on. Constant current achieves a charge in the same time as most 5A taper chargers.
No risk of overheating - Automatic temperature control regulates charge current to a safe level in hot or enclosed conditions.
Supplied with long input and output leads (13 ft / 4m combined), a detachable battery clamp & fused weatherproof eyelet connection set for direct connection to the battery.
Optional accessories include
• wall bracket
• replacement battery clamps set
• fused eyelet connection set
• dual purpose connection set with plug which fits both automotive cigar socket and
• DIN 12V socket (as found on BMW & Triumph touring motorcycles)
• 2.5m / 8ft output extension lead.
Certifications: 120V model to UL & CSA . 2-year warranty.
Now comes with a wallbracket, detachable battery clips, a weatherproof permanent connector & a SAE adapter for connection to traditional smartcharger connections.
Advanced 4-step charging program :
STEP 1: Boost – Constant current charging at 1,8A until the rising voltage reaches14,3V.
STEP 2: Absorption - Voltage held at 14,3V until the current drawn by the battery falls to 200mA.
STEP 3: Maintenance - Float mode : the voltage is held at 13,5V for ideal long-term battery care.
STEP 4: Interactive standby - Monitors if current exceeds 200mA during long term maintenance charging. If it does, it cycles between steps 2 and 3 to prevent the battery from losing any charge due to permanently connected devices such as an alarm or parasitic drain caused by aged or faulty vehicle wiring.
With interactive standby your battery will always be ready to start your vehicle.
website design and web hosting by uniwebserve.com